AOM Q-switched UV Laser System Wavelength: 266nM, 351nM, 355nM
|
AOM Q-switched
TEMoo ~95%
Internal Temprature Stablizer
Stable Output Power
On/Off Key Lock Switch
Function Panel Display
Optional Fiber Coupling
Optional Computer Interface
Wide Operating Temperature
CDRH Complied |
|
|
AOM (High Speed Q-Switched via Acousto-Optic Modulator) Laser System
Item No. |
ษ (nm) |
Pulse Energy (at 1KHz) |
Pulse Duration (at 1KHz) |
Max. Pulse Repetition Rate |
Average Output Power |
UVSQAOM351-40 |
351 |
40 สJ |
< 10 nsec |
10 KHz |
> 60mW |
UVSQAOM355-10 |
355 |
10 สJ |
< 10 nsec |
10 KHz |
> 15mW |
UVSQAOM355-20 |
355 |
20 สJ |
< 10 nsec |
10 KHz |
> 30mW |
UVSQAOM355-20S
GARNET |
355 |
20 สJ (200 Hz) |
< 5 nsec (200 Hz) |
- |
- |
UVSQAOM266-3 |
266 |
3 สJ |
< 10 nsec |
10 KHz |
> 6mW |
|
|
Item No.: UVSQAOM351-40
AOM - High Speed Q-Switched via Acousto-Optic Modulator Laser
|
- Q-Switched with AOM, ext./int. triggering
- Wavelength: 351nM
- Pulse energy at 1 KHz: > 40 สJ
- Max. Average Pout (at 3 KHz): > 60 mW
- External triggering: 0 - 10 KHz
- Internal triggering: 0.01 - 10 KHz
- Max. Pulse Repetition Rate: 10 KHz
- Pulse Duration at 1 KHz: < 10 ns
- Polarization: linear > 100:1, horizantal (Optional Vertical)
- Beam Divergence (Half angle 1/e2): 4 mrad
- Beam Diameter: 1.0 mm
- Laser head size: 55 x 90 x 299mm
- Function panel display
- Internal over heat automatic shut off
- Microprocessor controlled laser driver/power supply
(95 x 252 x 252mm)
- Cable length: 52 inches (132cm)
- Laser Head Heating Power, w: <100
- Operating Voltage: 115+/-20% VAC - 230+/-15% VAC / 50 -60Hz (selectable)
- Optional DC Driven Laser Driver/Controller
- Size: 66 x 90 x 185 mm
- Input Voltage: 24 VDC, < 100W
|
|
|
Item No.: UVSQAOM355-5
AOM - High Speed Q-Switched via Acousto-Optic Modulator Laser
|
- Q-Switched with AOM, ext./int. triggering
- Wavelength: 355 nM
- Pulse energy at 1 KHz: > 5 สJ
- Pulse energy at 10 KHz: > 0.2 สJ
- Max. Average Pout (at 3 KHz): > 10 mW
- External triggering: 0 -10 KHz
- Internal triggering: 0.01 - 10 KHz
- Pulse length at 1 KHz: < 10 ns
- Pulse length at 10 KHz: < 20 ns
- Polarization: linear > 100:1, Vertical
- Laser head size: 55 x 90 x 299mm
- Function panel display
- Internal over heat automatic shut off
- Microprocessor controlled laser driver/power supply
(95 x 252 x 252mm)
- Cable length: 52 inches (132cm).
- Laser Head Heating Power, w: <100
- Operating Voltage: 115+/-20% VAC - 230+/-15% VAC
50 - 60Hz(selectable)
- Optional DC Driven Laser Driver/Controller
- Size: 66 x 90 x 185 mm
- Input Voltage: 24 VDC, < 100W
|
|
|
Item No.: UVSQAOM355-10
AOM - High Speed Q-Switched via Acousto-Optic Modulator Laser
|
- Q-Switched with AOM, ext./int. triggering
- Wavelength: 355 nM
- Pulse energy at 1 KHz: > 10 สJ
- Pulse energy at 10 KHz: > 0.3 สJ
- Max. Average Pout (at 3 KHz): > 15 mW
- External triggering: 0 - 10 KHz
- Internal triggering: 0.01 - 10 KHz
- Pulse length at 1 KHz: < 10 ns
- Pulse length at 10 KHz: < 20 ns
- Polarization: linear > 100:1, Vertical
- Laser head size: 55 x 90 x 299mm
- Function panel display
- Internal over heat automatic shut off
- Microprocessor controlled laser driver/power supply
(95 x 252 x 252mm)
- Cable length: 52 inches (132cm).
- Laser Head Heating Power, w: <100
- Operating Voltage: 115+/-20% VAC - 230+/-15% VAC
50 -60Hz(selectable)
- Optional DC Driven Laser Driver/Controller
- Size: 66 x 90 x 185 mm
- Input Voltage: 24 VDC, < 100W
|
|
|
Item No.: UVSQAOM355-20
AOM - High Speed Q-Switched via Acousto-Optic Modulator Laser
|
- Q-Switched with AOM, ext./int. triggering
- Wavelength: 355 nM
- Pulse energy at 1 KHz: > 20 สJ
- Pulse energy at 10 KHz: > 0.7 สJ
- Max. Average Pout (at 3 KHz): > 30 mW
- External triggering: 0 - 10 KHz
- Internal triggering: 0.01 - 10 KHz
- Pulse length at 1 KHz: < 10 ns
- Pulse length at 10 KHz: < 20 ns
- Polarization: linear > 100:1, Vertical
- Laser head size: 55 x 90 x 299mm
- Function panel display
- Internal over heat automatic shut off
- Microprocessor controlled laser driver/power supply
(95 x 252 x 252mm)
- Cable length: 52 inches (132cm).
- Laser Head Heating Power, w: <100
- Operating Voltage: 115+/-20% VAC - 230+/-15% VAC
50 - 60Hz(selectable)
- Optional DC Driven Laser Driver/Controller
- Size: 66 x 90 x 185 mm
- Input Voltage: 24 VDC, < 100W
|
|
|
Item No.: UVSQAOM355-20S GARNET
AOM - High Speed Q-Switched via Acousto-Optic Modulator Laser
|
- Wavelength: 355 nm
- Collateral radiation (wavelengths 532nm/1064nm): < 0.1% of UV
- Average Pulse Energy (200 Hz nominal): 20+/-10% สJ
- Energy Stability - StdDev/Average (at 200 Hz, 20 mJ nominal, 1 hour): < 10%
- Laser Pulse duration, FWHM: 5+/-2 ns (at 200 Hz)
- Rep Rate: External Triggering: 200 Hz
- Polarization: Linear, >100:1, +/-5 to horizontal
- Divergence (full angle at 50% energy): 3.4 +/- 0.5 mrad
- Beam Diameter (at 50% energy): 400+/-100 mm as measure at the laser aperature
- Beam Profile: Gaussian*
- Beam ellipticity*: < 1.75 (typ.1.2-1.4)
- Beam Height: 33.5 mm +/- 0.5 mm
- Output Beam Static alignment tolerance: +/- 0.25 mm
- Output Beam Angular Tolerance: +/- 2.5 mrad
- Output Beam pointing stability (std dev,1 hour): < 100 สrad
- Laser Trigger to Sync Out Time Delay **: 400 ns +/-200 ns
- Laser Trigger to Sync Out Jitter, FWHM **: <8 ns
- Laser Emission to Sync Out Pulse Time Jitter: <5 ns
- Laser Emission to Sync Out Pulse Time Delay: < 50 ns
- External Trigger (Input signal):
- Pulse Amplitude: +5 V +/-10%
- Pulse duration: >1 and <20 ms
- Rise Time: <100 ns
- AC impedance: 1 kOhm
- Output Sync Pulse(output signal):
- Pulse Amplitude: +5 V +/-10% (R load =50 Ohm)
- Pulse duration: 2.5 ms +/-30%
- Rise Time: <100 ns
- Control connector allows to turn on / turn off pumping (remotely) by means of mechanical switching or by means of TTL-signal: 0 - 1 V - pumping on 3.5 - 5 V - pumping off
- Input Voltage: 24 V } 2.4 V DC
- Current consumption: < 4 A
- Weight: Laser - < 2.0 Kg, Power supply - < 1.6 Kg
- Size: Laser - 55 x 90 x 299 mm, Power Supply - 66 x 90 x 185 mm
- Operating Temp/Humidity Range: 15-35 C, up to 80% non condensing
- Shipping Temp/Humidity Range: -50-+50 C, up to 80% humidity at 25
- Power dissipation: Laser - < 60 W, Power supply - < 40 W
- Warm up time: < 10 min.
- Compliance: CDRH, CE, EN 61000-95, GOST 23088-80 tested
- *Gaussian shape of beam profile allows focusing into extremely small spot (~1 mm).
- **Sync Out signal is generated by pulse of laser light.
- Beam waist is placed approximately 100 mm behind the front panel of the laser head.
|
|
|
Item No.: UVSQAOM266-3
AOM - High Speed Q-Switched via Acousto-Optic Modulator Laser
|
- Q-Switched with AOM, ext./int. triggering
- Wavelength: 266 nM, 532nM, 1064nM*
- Pulse energy at 1 KHz: > 3 สJ
- Max. Average Pout (at 3 KHz): > 6 mW
- External triggering: 0 - 10 KHz
- Internal triggering: 0.01 - 10 KHz
- Laser emission at pulse repetition rate < 200 Hz is internaly disabled.
- Max. Pulse Repetition Rate: 10 KHz
- Pulse Duration at 1 KHz: < 10 ns
- Polarization: linear > 100:1, Vertical (Optional horizantal)
- Laser head size: 55 x 90 x 299mm
- Function panel display
- Internal over heat automatic shut off
- Microprocessor controlled laser driver/power supply
(95 x 252 x 252mm)
- Cable length: 52 inches (132cm)
- Laser Head Heating Power, w: <100
- Operating Voltage: 115+/-20% VAC - 230+/-15% VAC / 50 -60Hz (selectable)
- *UVSQAOM266-3 laser is capabile to emit up to 3 wavelengths: 266nM, 532nM, 1064nM.
- Optional DC Driven Laser Driver/Controller
- Size: 66 x 90 x 185 mm
- Input Voltage: 24 VDC, < 100W
|
|
|